
Ultrasonic Diagnostic Instrument (Vet)
User’s Manual V1.01
- 35 -
workstation software prompts "U disk is storing data, please wait patiently...", after the prompt disappears,
all images and data of the workstation will be transferred to U disk by one-key.
Explanation:
1. When transferring to U disk by one-key, you must first open the workstation software and then
insert U disk, to ensure that the workstation can identify the U disk.
2. Tap the icon
, all the images, the saved checklists and obstetric lists, the generated reports on
the workstation software will transfer to U disk by one-key.
3. The images, checklists, obstetric lists and reports saved in the kxStation folder of U disk.
The image is stored in U: \ kxSation \ image; the checklist is stored in U: \ kxSation \ checklist; the
obstetric record is stored in U: \ kxSation \ OB; the generated report is stored in U: \ kxSation \
report.
10.3.2.5 Mobile album view images and reports of workstation
1. Open the workstation software;
2. Tap the icon
in the lower right corner of the Image View interface of workstation software,
open the mobile album, find the "image" and "report", you can view the saved images and the
generated reports.
10.3.2.6 Quit workstation software
Tap quit
to quit mobile ultrasound workstation software.
10.4 PC-side ultrasound workstation software kx_station_v
The usages for PC-side ultrasonic workstation software are similar to mobile workstation; it
communicates with K10 equipment via Wifi.
Wi-Fi
10.4.1 Preparation before use
1. Install the PC-side ultrasonic workstation software “kx_station_v” on the computer, kx_station_v is
free to install, just copy the software to the computer;
2. In the K10 preset interface, Wifi is set to “On”;
3. The computer needs to connect to the K10 equipment via Wireless network card or Wifi. Open the
computer's wireless network connection, in the available WLAN list, select K10 network ID, such as
“1808880”, connect to it;
4. After the connection is successful, double-click the icon “
kx_station_v” to enter ultrasound
workstation interface, the wireless signal icon “ ” appears on the lower left corner of the K10 screen, then
you can use the PC-side ultrasound workstation software.
Note:
1. You first turn on the Wifi of K10 equipment and then set up the computer’s WLAN. After
WLAN connection is successful, open the ultrasound workstation software.
2. The Wifi network ID of K10 equipment is the default number displayed on the nameplate
of K10, such as “1808880”.
3. When the network is disconnected, the wireless signal icon on the K10 screen disappears.