KAESER KOMPRESSOREN i.Comp 3, Руководство оператора

Страница: 43 / 80

8.1.3 Activating/deactivating the LOAD/PARTIAL LOAD control mode
You can select the LOAD/PARTIAL LOAD control mode by pressing the «FUNCTION» key
when the machine is running or ready.
➤ Press the «FUNCTION» key. Control mode activated.
Result The FUNCTION LED lights white.
In LOAD/PARTIAL LOAD mode, the machine runs at a reduced speed once the cut-out pressure
has been reached.
➤ Press the «FUNCTION» key again to deactivate the control mode.
8.2 Acknowledging messages
Fig. 11 Acknowledging messages
1
Maintenance symbol (yellow)
2
Fault symbol (red)
3
«OFF/Acknowledge» key
Fault message
Messages are displayed based on the “most recent” principle.
In the event of a fault in one of the operating modes, the machine is switched off.
At the same time, the fault symbol and message number is constantly displayed.
Acknowledging is only possible if the following prerequisites have been met:
■ voltage applied,
■ machine is switched off and
■ the «OFF» key has been pressed for 2 seconds.
8 Operation
8.2 Acknowledging messages
No.: 901731 24E
Operator manual Reciprocating compressor
i.Comp 3
33