KAESER KOMPRESSOREN i.Comp 3, Руководство оператора

Страница: 39 / 80

7 Initial Start-up
7.1 Ensuring safety
Follow the instructions below for safe installation work.
Warning instructions are displayed prior to a potentially dangerous task.
Disregarding warning instructions can cause serious injuries!
Compliance with safety instructions
Ignoring safety instructions can cause unforeseeable dangers.
➤ Follow the instructions in chapter 3 "Safety and Responsibility".
➤ Installation work may only be carried out by authorised personnel.
➤ Make sure that no one is working on the machine.
➤ Ensure that the enclosure parts are screwed on.
When working on live components
Touching voltage carrying components can result in electric shocks, burns or death.
Dangerous voltages persist on the intermediate circuit capacitors for some time after power is
switched off.
When the motor cover is open, live parts are exposed.
➤ Work on electrical equipment may only be carried out by authorised electricians.
➤ Switch off and lock out the power supply isolating device (disconnect the plug/plug connection)
and verify that no voltage is present.
➤ Before starting work on the frequency converter or intermediate circuit capacitors, wait at
least 5 minutes.
When working on the compressed air system
Compressed air is contained energy. Uncontrolled release of this energy can cause serious injury
or death. The following safety instructions relate to any work on components that could be under
pressure.
➤ Isolate the machine from the air consumers.
➤ Fully de-pressurise all pressurised components and enclosures.
➤ Check for zero pressure.
➤ Do not open or dismantle any valves.
When working on the drive system
Touching voltage carrying components can result in electric shocks, burns or death.
➤ Switch off and lock out the power supply isolating device (disconnect the plug/plug connection)
and verify that no voltage is present.
7 Initial Start-up
7.1 Ensuring safety
No.: 901731 24E
Operator manual Reciprocating compressor
i.Comp 3
29