KAESER KOMPRESSOREN i.Comp 3, Руководство оператора

Страница: 23 / 80

➤ Wear close-fitting clothes and a hair net if necessary.
➤ Ensure that all covers and safety guards are in place and secured before re-starting.
Temperature
High temperatures are generated during compression. Touching hot components may cause inju‐
ries.
➤ Avoid contact with hot components.
These include, for example, compressor block, compressed air pipes, cooler and motor.
➤ Wear protective clothing.
➤ If welding is carried out on or near the machine take adequate measures to ensure that no
parts of the machine can ignite from of sparks or heat.
Noise
The housing absorbs the machine noise to a tolerable level. This function will be effective only if
the housing is closed.
➤ Operate the machine only with intact sound insulation.
➤ Wear ear protection if necessary.
Safety valve blow-off results in high noise emission.
Unsuitable spare parts
Unsuitable spare parts compromise the safety of the machine.
➤ Use only spare parts approved by the manufacturer for use in this machine.
➤ Use only original KAESER spare parts on pressure bearing parts.
Conversion or modification of the machine
Modifications, additions or conversions to or of the machine can result in unpredictable hazards.
➤ Do not convert or modify the machine!
➤ Obtain written approval by the manufacturer prior to any technical modification or expansion of
the machine.
Extending or modifying the compressed air station
If dimensioned appropriately, safety valves reliably prevent an impermissible pressure rise. New
dangers may arise if you modify or extend the compressed air station.
➤ When extending or modifying the compressed air station:
Check the blow-off capacity of safety valves on air receivers and in compressed air lines be‐
fore installing a new machine.
➤ If the blow-off capacity is insufficient:
Install safety valves with higher blow-off capacity.
3.5.2 Safe machine operation
The following information will provide you with the necessary code of conduct to ensure safe han‐
dling of the machine during individual product life phases.
3 Safety and Responsibility
3.5 Dangers
No.: 901731 24E
Operator manual Reciprocating compressor
i.Comp 3
13