KAESER KOMPRESSOREN i.Comp 3, Руководство оператора

Страница: 25 / 80

Commissioning, operation and maintenance
During commissioning, operation and maintenance you may be exposed to dangers resulting from,
e.g., electricity, pressure and temperature. Careless actions can cause accidents with severe ad‐
verse effects for your health.
➤ Work should be carried out by authorised personnel only.
➤ Wear close-fitting, flame-resistant clothing. Wear protective clothing as necessary.
➤ Switch off and lock out the power supply isolating device and verify that no voltage is present.
➤ Check that there is no voltage on floating contacts (if available).
➤ Close shut-off valves or otherwise isolate the machine from the compressed air network to en‐
sure that no compressed air can flow back into the machine.
➤ Fully vent all pressurised components and enclosures. Check for zero pressure.
➤ Allow the machine to cool down sufficiently.
➤ Do not open the housing while the machine is switched on.
➤ Do not open or dismantle any valves.
➤ Use only spare parts approved by KAESER for use in this machine.
➤ Carry out regular inspections:
to detect visible damage,
to inspect the safety components, and
to inspect the components requiring monitoring.
➤ Do not pour oil into the crankcase. The machine is oil-free.
➤ Pay particular attention to cleanliness during all maintenance and repair work. Cover compo‐
nents and exposed openings with clean cloths, paper or tape to keep them clean.
➤ Do not leave any loose components, tools or cleaning rags on or in the machine.
➤ Components removed from the machine can still be dangerous:
Do not attempt to open or destroy any components taken from the machine.
De-commissioning/storage/disposal
Improper handling of used parts may endanger the environment.
➤ Dispose of the machine in accordance with local environmental regulations.
3.5.3 Organisational Measures
➤ Designate personnel and their responsibilities.
➤ Give clear instructions on reporting faults and damage to the machine.
➤ Give instructions on fire reporting and fire-fighting measures.
3.6 Safety devices
Various safety devices ensure safe working with the machine.
➤ Do not change, bypass or disable safety devices.
➤ Check safety devices for correct function regularly.
➤ Do not remove or obliterate labels and notices.
➤ Ensure that labels and notices are clearly legible.
Further information More information on safety devices is contained in chapter 4, section 4.2.
3 Safety and Responsibility
3.6 Safety devices
No.: 901731 24E
Operator manual Reciprocating compressor
i.Comp 3
15