KAESER KOMPRESSOREN i.Comp 3, Руководство оператора

Страница: 40 / 80

➤ Before starting work on the frequency converter or intermediate circuit capacitors, wait at
least 5 minutes.
➤ Do not open the cabinet while the machine is switched on.
Further information Details of authorised personnel are found in chapter 3.4.2.
Details of dangers and their avoidance are found in chapter 3.5.
7.2 Instructions to be observed before commissioning
Incorrect or improper commissioning can cause injury to persons and damage to the machine.
➤ Commissioning may be carried out only by authorised installation and service personnel who
have been trained on this machine.
Special measures for re-commissioning after storage/standstill of machine
Storage period/
standstill longer than
Measure
36 months ➤ Have the overall technical condition checked by an authorised
KAESER SERVICE technician.
Tab. 18 Re-commissioning after storage/standstill of machine
7.3 Checking installation and operating conditions
➤ Check and confirm all the items of the checklist before commissioning the machine:
To be checked See
chapter
Confirmed?
➤ Are the operators fully conversant with the applicable safety regula‐
tions?
–
➤ Have all installation conditions been fulfilled and is proper venting
ensured?
5
➤ Are the tolerance limits of the mains voltage (power supply network)
within the permissible tolerance limits of the rated voltage (ma‐
chine)? (see also the name plate)
2.1
➤ Is the fuse rating sufficiently dimensioned? 2.10
➤ Is the connection to the compressed air consumer made with a flexi‐
ble hose?
6.3
Tab. 19 Check list of installation conditions
7.4 Starting the machine for the first time
The machine may
only be switched on by using the «ON» key.
Precondition No personnel are working on the machine.
All removable parts are screwed down.
7 Initial Start-up
7.2 Instructions to be observed before commissioning
30
Operator manual Reciprocating compressor
i.Comp 3
No.: 901731 24E