manualshive.com logo in svg

Kaba ILCO FDU, Руководство пользователя, Страница: 95 / 276

Поделиться
Скачать
Kaba ILCO FDU Скачать руководство пользователя страница 95

Chapter 4 

84

Kaba Ilco Lodging Access Control System

4.5 

New Versus Duplicate Keycards 

The FDU can make New or Duplicate keycards. When making a Guest keycard, the 
choice between New and Duplicate is possible after the room or suite number has 
been chosen. To toggle between both choices, select “New Key” and use the Left 

<

W

 >

and Right 

<

X

>

arrows as shown below.  

For 

a 

New 

keycard: 

   For 

a 

Duplicate 

keycard: 

                                      

Pressing < > will encode a New or Duplicate keycard depending on the choice 
selected.

For a detailed description on the screen and menus functionality, keypad and arrow 
keys usage, refer to 

Section 3.2 – FDU Overview

.

4.5.1 New 

Keycards 

Whenever a keycard designated as New is made and used in the lock, the time stamp in 
lock memory is updated for that level and all previous keycards (New or Duplicate) are 
cancelled.

4.5.2 Duplicate 

Keycards 

The system provides for the addition of users in situations where invalidating existing 
keycards is not wanted. Duplicate keycards should be made in situations where it is 
necessary to add a user (for example, an additional occupant arriving to join an existing 
guest in the same room). 

A Duplicate keycard is accepted only when all the following conditions are met: 

a)

The keycard access level and address are the same as that of the lock; 

b)

The time stamp of the Duplicate keycard is more recent than the most recently 
used New keycard; 

c)

The keycard has not yet expired. 

The Duplicate keycard does not invalidate the existing keycards at that level. Both the 
New keycard and the Duplicate keycard remain valid until they expire, or until a more 
recent New keycard is inserted in the lock. 

Содержание ILCO FDU





















































































































































































































































































Отзывы:

Нет отзывов