Kaba ILCO FDU Скачать руководство пользователя страница 122 | Manualshive

Страница: 122 / 276

Kaba ILCO FDU Скачать руководство пользователя страница 122

Keycards

Kaba Ilco Lodging Access Control System

111

registered keycard, just like any normal Guest level keycard.

The expiry of a Pre-registered keycard applies starting from the registration date and
time.

Minimum keycard:

Front Desk Authorization

Shortcut: Swipe

authorized keycard, press 1 and 6.

Expiry:

From 1 hour to 2730 nights from the registration date and time (same as for the
corresponding Guest level keycard).

Factory default expiry:

1 night

Parameters:

Same as for the corresponding Guest level keycard.

Options:

Same as corresponding Guest level keycard.

Notes:

The Pre-registered keycard may become valid up to one hour before its selected
registration time, which is kept only in hours and is added to the time in hours and
minutes that the card was made. (For example, a Pre-registered keycard, which is
made at 08:25, with a registration time of 16:00, will become valid at 15:25 on the
appropriate date, in order to ensure that it is valid before 16:00.).

Enter the registration date and time when requested. After the room number is entered,
select the “Reg. Date” and press the right

<

X

>

arrow to enter the planned arrival date

.

Press < > to go back to the previous menu level

.

Select the “Reg. Time” and enter in the registration time.

«
...
120
121
122
123
124
...
»

Содержание ILCO FDU





















































































































































































































































































Отзывы:

Нет отзывов