Kaba ILCO FDU Скачать руководство пользователя страница 212 | Manualshive

Страница: 212 / 276

Kaba ILCO FDU Скачать руководство пользователя страница 212

Interfaces

Kaba Ilco Lodging Access Control System

201

requested number of keycards. There is no data entry on the FDU keypad in PMS mode,
which prevents human error and saves time.

Only Guest level keycards can be made in PMS mode. Functions available will vary with
the PMS system in use by the property. Options may include checking-in a guest,
checking out a guest, and assigning/reading folio numbers. For security reasons, every
operation is audited by the FDU, except for reading folio numbers.

NOTE: The FDU will not accept information from the PMS if it does not match the

features selected for the FDU. For example, in order to assign a folio
number through the PMS, folio numbers must be enabled in the FDU
Features Menu.

8.1.1

Entering and Exiting the PMS Interface

When the FDU is in Manual Mode, the welcome screen that is displayed when a key is
pressed is:

To enter PMS Mode:

1.

Swipe a keycard or PIN with a Front Desk Authorization level. If using an FDA
keycard or PIN press <

> after entering the FDU.

2.

Press 3 or use the down <

T

> arrow followed by < > to reach the “PMS mode”

menu.

«
...
210
211
212
213
214
...
»

Содержание ILCO FDU





















































































































































































































































































Отзывы:

Нет отзывов