manualshive.com logo in svg

Kaba ILCO FDU, Руководство пользователя, Страница: 30 / 276

Поделиться
Скачать
Kaba ILCO FDU Скачать руководство пользователя страница 30

Front Desk Units - Using and Programming 

Kaba Ilco Lodging Access Control System 

 

19

After the FDU has been authorized, it will offer menu choices for making keycards or 
other actions according to the authorization level of the user. After one of the time-out 
periods has expired, the FDU will go back to the unauthorized mode for security issues. 
For more details, please refer to S

ection 3.6, part 9 – FDU Time-outs

.

When running on batteries, the FDU turns off the LCD backlight and enters a power 
saving mode after a period of inactivity to save on the batteries. Pressing any key will 
exit this mode, turn the backlight on and go to the main Kaba screen. 

IMPORTANT: 

For security purposes, all transactions performed by the FDU are 
audited, showing the authorization keycard used, the transaction 
details, date and time. 

DO NOT lend Authorization keycards to anyone. 

DO NOT leave Authorization keycards unattended anywhere. 

DO NOT leave the FDU unattended, and DO NOT allow another 
person to use the FDU, without first logging off the previous user’s 
authorization by pressing <

> until the main screen is displayed. 

Keycards, including Authorization keycards, can be erased by 
strong magnetic fields. 

3.2.3 FDU 

Menus 

The FDU menus are displayed on the FDU’s LCD screen. As example, the main menu is 
shown below: 

Содержание ILCO FDU





















































































































































































































































































Отзывы:

Нет отзывов