Kaba ILCO FDU Скачать руководство пользователя страница 133 | Manualshive

Страница: 133 / 276

Kaba ILCO FDU Скачать руководство пользователя страница 133

Chapter 4

122

Kaba Ilco Lodging Access Control System

D. Special Purpose Keycards

D.1 Battery Test

Purpose:

This keycard prompts a low battery indicator in locks when the battery is below
acceptable voltage. If the red and green lights flash together when the Battery Test
keycard is inserted in the lock, the battery is low. This should occur within 2 to 4
weeks prior to battery failure. There is a single green flash if the battery is still good.

Minimum keycard:

Front Desk Authorization

Shortcut: Swipe

authorized keycard, press 4 and 1

Expiry: No

Expiry

Factory default expiry:

None

Parameters: Number

of

cards

Notes:

The Battery Test keycard does not give access to the door.

Weekly battery testing is recommended.

Any Sub-master or Master keycard will also prompt the low battery indicator just
before giving access to the door, and the same sequence of indicator lights will be
displayed (i.e. a low battery is indicated by red and green lights flashing together).

No battery indication is available for any guest keycards.

D.2 Programming

Purpose:

Prepares the lock for communication with the Front Desk Unit.

Minimum keycard:

Programming Authorization

Shortcut: Swipe

authorized keycard, press 4 and 2

Expiry:

From 1 to 2730 nights

Factory default expiry:

2730 nights

Parameters: Number

of

cards

Notes:

If the lock has never been initialized, or following a battery replacement, the
Initialization keycard must be inserted prior to the Programming keycard.

If the FDU is not connected and/or communication with the lock does not begin within
30 seconds, the lock will return to its normal state with no changes to its programming.

«
...
131
132
133
134
135
...
»

Содержание ILCO FDU





















































































































































































































































































Отзывы:

Нет отзывов