Kaba ILCO FDU Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 276

Kaba ILCO FDU Скачать руководство пользователя страница 32

Front Desk Units - Using and Programming

Kaba Ilco Lodging Access Control System

21

The third area shows either the date & time, or a page title as text information. Note that
when in Daylight Savings Time (DST) an asterisk (*) is shown at the end of the time
shown.

The fourth area shows the power indicator. It indicates if the external power is connected,
disconnected, if the battery is being charged, if the battery is running out or if the battery
pack is not present or failed. The possible values for the power indicator are:

Power indicator

Description

External power supply connected and battery fully charged.

External power supply disconnected, running on battery.

(flashing)

Battery nearly drained, requires immediate recharging.

to

External power supply connected, battery charging (the
indicator will show that the battery voltage level is charging)

External power supply connected, battery pack not present or
failed.

3.2.3.2 Page

Content:

The page content may display 3 different types of information: menus, inputs, and
messages reported by the FDU.

The first type of information is a menu being shown. A menu is a page where the user
must select one item from the selection displayed. Each item is a link o another page and
has a label and a number associated to it. The user may select the desired item by entering
the number using the keypad (no need to press < >) or using the up <

S

> or down <

T

>

arrows to move the highlighted horizontal bar over the item and pressing < > to select
the item. The <

> key is used to cancel an operation or move backward through the

menus.

In the following example, the “Guest Keycard” item that is highlighted will be selected if
1 is pressed on the keypad or the < > key is pressed.

«
...
30
31
32
33
34
...
»

Содержание ILCO FDU





















































































































































































































































































Отзывы:

Нет отзывов