Kaba ILCO FDU Скачать руководство пользователя страница 53

Страница: 53 / 276

Chapter 3

Kaba Ilco Lodging Access Control System

3.5.5.4 Modify an existing PIN:

If an employee wishes to change their PIN or the PIN in use has become compromised,
the currently assigned PIN can be modified.

Swipe a keycard having a GMA or MA authorized user level.

Press 7, or use the down <

> arrow followed by < > to reach the “FDU Setup”

menu.

Press 3, or use the down <

> arrow followed by < > to reach the “PIN

Management” menu.

Swipe the keycard corresponding to the authorized user who’s PIN is to be modified.

The screen will display the current PIN information.

To modify the PIN value, press the down <

> arrow and select the “Modify PIN?”

value. Use the left <

> or right <

> arrow to set the value to YES.

Содержание ILCO FDU





















































































































































































































































































Результаты поиска

Содержание ILCO FDU

Отзывы:

Kaba ILCO FDU, Руководство пользователя, Страница: 53 / 276

Результаты поиска

Содержание ILCO FDU

Отзывы: