JVC Everio GZ-HM860, Руководство пользователя

Страница: 26 / 171

0
The system starts to search for Bluetooth-compliant devices in the
area that can be registered.
0
The method of setting varies with the device. Refer also to the
instruction manual of the device.
7
Tap the device to register.
.
0
If the device to register cannot be found, check the device settings
again and restart search.
0
If the device name cannot be acquired, the Bluetooth device address
(BD address) will appear instead.
0
Characters in the device name that cannot be displayed are shown
as □.
8
Tap “YES”.
.
0
If authentication of the device is necessary, the passkey entry screen
will appear.
0
If authentication of the device is not necessary, the passkey entry
screen will not appear.
9
Enter the passkey for the device to register.
.
0
Tap on a numeric character to enter it.
0
Tap “DELETE” to clear the last numeric character.
0
After input of the numeric characters is complete, tap “SET”.
0
The number of digits in a passkey varies with the device to register.
0
A passkey is also known as a "PIN code".
0
For details on the passkey, refer to the instruction manual of the
device to register.
0
After registration of the device is complete, tap “OK”.
o
Responding to Registration Requests from Bluetooth-
compliant Devices
1
Tap “MENU”.
.
2
Tap “
Q
”.
.
3
Tap “Bluetooth”.
.
4
Tap “REGISTER DEVICE”.
.
5
Tap “WAIT FOR DEVICE”.
.
6
Tap “OK” when “WAIT FOR REQUEST FROM Bluetooth DEVICEALL
CURRENT CONNECTIONS WILL BE DISCONNECTED” is displayed.
.
0
This unit goes into a standby mode to wait for registration requests
from Bluetooth-compliant devices. Perform the registration settings
on the device to register.
Getting Started
26