Jungheinrich DFG 425, Руководство по эксплуатации

Страница: 90 / 103

F 13
02
.0
8.
GB
10.2 Motor servicing DFG
Replacing the motor oil and motor oil
filter
M
Only change the motor oil when the
motor is at operating temperature and
the truck is horizontal. Always replace
the motor oil and motor oil filter together.
Draining the motor oil
– Unscrew the (2) lid.
– Thoroughly clean the oil drain plug (4)
and around the drain hole.
– Unscrew the oil drain plug and drain
the oil into a suitable container.
F
Risk of scalding through hot oil.
– Screw in the oil drain plug with a new
seal.
F
Dispose of used oil in accordance with
environmental regulations.
Replacing the motor oil filter
– Undo the hose clamp from the hose
(7) and remove the hose.
– Remove the screws (6) from the air
filter attachment (5) and place the air
filter to one side.
– Undo the oil filter (3) with a filter
wrench and manually unscrew it.
F
Collect any emerging oil and dispose of
the oil and oil filter in accordance with
environmental regulations.
– Thoroughly clean the raised faces of
the oil filter flange.
– Apply a thin layer of fresh motor oil to the seal of the new oil filter.
– Hand-tighten the oil filter.
– Fit the air filter, insert the hoses and tighten with hose clamps.
2
4 3
6
7
5
F 13
02
.0
8.
GB
10.2 Motor servicing DFG
Replacing the motor oil and motor oil
filter
M
Only change the motor oil when the
motor is at operating temperature and
the truck is horizontal. Always replace
the motor oil and motor oil filter together.
Draining the motor oil
– Unscrew the (2) lid.
– Thoroughly clean the oil drain plug (4)
and around the drain hole.
– Unscrew the oil drain plug and drain
the oil into a suitable container.
F
Risk of scalding through hot oil.
– Screw in the oil drain plug with a new
seal.
F
Dispose of used oil in accordance with
environmental regulations.
Replacing the motor oil filter
– Undo the hose clamp from the hose
(7) and remove the hose.
– Remove the screws (6) from the air
filter attachment (5) and place the air
filter to one side.
– Undo the oil filter (3) with a filter
wrench and manually unscrew it.
F
Collect any emerging oil and dispose of
the oil and oil filter in accordance with
environmental regulations.
– Thoroughly clean the raised faces of
the oil filter flange.
– Apply a thin layer of fresh motor oil to the seal of the new oil filter.
– Hand-tighten the oil filter.
– Fit the air filter, insert the hoses and tighten with hose clamps.
2
4 3
6
7
5