Jungheinrich DFG 425, Руководство по эксплуатации

Страница: 102 / 103

F 25
02
.0
8.
GB
11 Exhaust system
The exhaust system must be checked for emissions at regular intervals. Black or blue
exhaust is a sign of high emission levels and requires the attention of specialist
personnel.
12 Recommissioning
The truck may only be recommissioned after cleaning or repair work, once the
following operations have been performed.
– Test horn.
– Test main switch operation.
– Test brake.
– Lubricate the truck in accordance with the lubrication schedule.
13 Decommissioning the industrial truck
If the industrial truck is to be decommissioned for more than two months, e.g. for
operational reasons, it must be parked in a frost-free and dry location and all
necessary measures must be taken before, during and after decommissioning as
described.
M
During decommissioning the truck must be jacked up so that all the wheels are clear
of the ground. This is the only way of ensuring that the wheels and wheel bearings
are not damaged.
If the truck is to be out of service for more than 6 months, further measures must be
taken in consultation with the manufacturer’s service department.
13.1 Prior to decommissioning:
– Thoroughly clean the truck.
– Check the brakes.
– Check the hydraulic oil level and replenish as necessary (see Chapter F).
– Apply a thin layer of oil or grease to any non-painted mechanical components.
– Lubricate the truck in accordance with the lubrication schedule (see Chapter F).
– Charge the battery (see Chapter D).
– Disconnect the battery, clean it and grease the terminals.
Z
In addition, follow the battery manufacturer’s instructions.
– Spay all exposed electrical contacts with a suitable contact spray.
F 25
02
.0
8.
GB
11 Exhaust system
The exhaust system must be checked for emissions at regular intervals. Black or blue
exhaust is a sign of high emission levels and requires the attention of specialist
personnel.
12 Recommissioning
The truck may only be recommissioned after cleaning or repair work, once the
following operations have been performed.
– Test horn.
– Test main switch operation.
– Test brake.
– Lubricate the truck in accordance with the lubrication schedule.
13 Decommissioning the industrial truck
If the industrial truck is to be decommissioned for more than two months, e.g. for
operational reasons, it must be parked in a frost-free and dry location and all
necessary measures must be taken before, during and after decommissioning as
described.
M
During decommissioning the truck must be jacked up so that all the wheels are clear
of the ground. This is the only way of ensuring that the wheels and wheel bearings
are not damaged.
If the truck is to be out of service for more than 6 months, further measures must be
taken in consultation with the manufacturer’s service department.
13.1 Prior to decommissioning:
– Thoroughly clean the truck.
– Check the brakes.
– Check the hydraulic oil level and replenish as necessary (see Chapter F).
– Apply a thin layer of oil or grease to any non-painted mechanical components.
– Lubricate the truck in accordance with the lubrication schedule (see Chapter F).
– Charge the battery (see Chapter D).
– Disconnect the battery, clean it and grease the terminals.
Z
In addition, follow the battery manufacturer’s instructions.
– Spay all exposed electrical contacts with a suitable contact spray.