Jungheinrich DFG 425 Скачать руководство пользователя

Страница: 63 / 103

0106

.GB

E 28

Controlling the speed of the lifting
device

Moving the control lever and changing
the motor speed governs the operating
speed of the hydraulic cylinders.

When the control levers are released
(22, 23) they automatically revert to
neutral and the lifting device remains in
the position it has reached.

Always apply the control lever
sensitively, never with a sudden jerk.
Release the control lever as soon as you
reach the stop.

– Set the travel direction switch (27) to

neutral.

– Increase the motor speed with the

accelerator pedal (21) and

– Continue to move the control lever

back to increase the speed of the
lifting device.

The motor speed does not affect the
lowering speed of the fork carriage.

It is forbidden to lift people with the lifting
device.

0106

.GB

E 28

Controlling the speed of the lifting
device

Moving the control lever and changing
the motor speed governs the operating
speed of the hydraulic cylinders.

When the control levers are released
(22, 23) they automatically revert to
neutral and the lifting device remains in
the position it has reached.

Always apply the control lever
sensitively, never with a sudden jerk.
Release the control lever as soon as you
reach the stop.

– Set the travel direction switch (27) to

neutral.

– Increase the motor speed with the

accelerator pedal (21) and

– Continue to move the control lever

back to increase the speed of the
lifting device.

The motor speed does not affect the
lowering speed of the fork carriage.

It is forbidden to lift people with the lifting
device.

Содержание DFG 425








































































































Результаты поиска

Содержание DFG 425

Отзывы:

Похожие инструкции для DFG 425

Бренды по названию

Популярные бренды

Jungheinrich DFG 425, Руководство по эксплуатации

Результаты поиска

Содержание DFG 425

Отзывы:

Похожие инструкции для DFG 425

Бренды по названию

Популярные бренды