manualshive.com logo in svg

Jungheinrich DFG 425, Руководство по эксплуатации

Поделиться
Скачать
Jungheinrich DFG 425 Скачать руководство пользователя страница 70

E 35

0106

.GB

Daily inspection and servicing of the seat belt

The operator must inspect the seat belt each day to ensure it is in a good condition
and is operating correctly before starting the truck. The following (non-exhaustive)
checks should be made:

– Extract the belt in full and make sure it is not twisted.
– Check the operation of the buckle and the belt returning to the retractor.

Check the automatic locking as follows:

– Park the truck on level ground.
– Try to remove the seat belt with a jerk; the automatic locking should prevent the belt

from being extracted.

F

The truck must not be operated with a faulty seat belt. Replace if at all damaged.

If the truck has been involved in an accident, replace the seat belt.

Damaged seat belts that no longer operate correctly must be replaced by trained
personnel.

E 35

0106

.GB

Daily inspection and servicing of the seat belt

The operator must inspect the seat belt each day to ensure it is in a good condition
and is operating correctly before starting the truck. The following (non-exhaustive)
checks should be made:

– Extract the belt in full and make sure it is not twisted.
– Check the operation of the buckle and the belt returning to the retractor.

Check the automatic locking as follows:

– Park the truck on level ground.
– Try to remove the seat belt with a jerk; the automatic locking should prevent the belt

from being extracted.

F

The truck must not be operated with a faulty seat belt. Replace if at all damaged.

If the truck has been involved in an accident, replace the seat belt.

Damaged seat belts that no longer operate correctly must be replaced by trained
personnel.

Содержание DFG 425








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды