0106
.GB
E 24
Towing trailers
or the truck itself being towed are only permitted occasionally, on
secure, level routes, with a maximum deviation of +/- 1% and at a max. speed of 5
km/h. The truck shall not be permanently used with trailers.
There must be no load on the load forks when another vehicle is being pulled.
Do not exceed the maximum trailer load specified for the forklift truck for trailers with
or without brakes. The specified trailer load only applies for the auxiliary coupling in
the counterbalance of the forklift. If a different trailer coupling is used on the truck, the
instructions of the coupling manufacturer must be observed.
After coupling and before starting the driver shall ensure that the trailer coupling
cannot become detached.
Forklift trucks pulling a load must be driven such that the trailing vehicle is driven
safely and can be stopped at all times.
F
Exhaust emissions:
The forklift truck must only be operated in well ventilated areas..
If the truck is operated in enclosed areas, this can lead to a build-up of harmful
exhaust emissions, resulting in dizziness, tiredness and even death.
5.2
Travel
F
Adapt the travel speed to the conditions
of the route, the work area and the load
– Set the travel direction switch (27) to
neutral.
– Raise the fork carriage approx. 200
mm so that the load forks are clear of
the ground.
– Tilt the mast fully backward.
– Release parking brake.
Forward travel
– Set the travel direction switch (27)
forward.
– Slowly apply the accelerator pedal
(21) until you reach the required travel
speed.
Changing direction
M
Only change direction when the truck has stopped.
– Set the travel direction switch (27) via neutral to the required direction.
– Slowly apply the accelerator pedal (21) until you reach the required travel speed.
21
27
20
0106
.GB
E 24
Towing trailers
or the truck itself being towed are only permitted occasionally, on
secure, level routes, with a maximum deviation of +/- 1% and at a max. speed of 5
km/h. The truck shall not be permanently used with trailers.
There must be no load on the load forks when another vehicle is being pulled.
Do not exceed the maximum trailer load specified for the forklift truck for trailers with
or without brakes. The specified trailer load only applies for the auxiliary coupling in
the counterbalance of the forklift. If a different trailer coupling is used on the truck, the
instructions of the coupling manufacturer must be observed.
After coupling and before starting the driver shall ensure that the trailer coupling
cannot become detached.
Forklift trucks pulling a load must be driven such that the trailing vehicle is driven
safely and can be stopped at all times.
F
Exhaust emissions:
The forklift truck must only be operated in well ventilated areas..
If the truck is operated in enclosed areas, this can lead to a build-up of harmful
exhaust emissions, resulting in dizziness, tiredness and even death.
5.2
Travel
F
Adapt the travel speed to the conditions
of the route, the work area and the load
– Set the travel direction switch (27) to
neutral.
– Raise the fork carriage approx. 200
mm so that the load forks are clear of
the ground.
– Tilt the mast fully backward.
– Release parking brake.
Forward travel
– Set the travel direction switch (27)
forward.
– Slowly apply the accelerator pedal
(21) until you reach the required travel
speed.
Changing direction
M
Only change direction when the truck has stopped.
– Set the travel direction switch (27) via neutral to the required direction.
– Slowly apply the accelerator pedal (21) until you reach the required travel speed.
21
27
20
Содержание DFG 425
