Jungheinrich DFG 425 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 103

background image

0106

.GB

E 34

5.7

Using the Seat Belt

If a seat belt is attached, always put it on before starting the truck. The belt must be
attached as follows:

– Remove the belt smoothly from the retractor.
– Wrap the belt around you and fit the lock into the buckle. Make sure the belt is not

twisted.

The operator should always sit back as far as possible. This is to protect the
operator’s back as much as possible and the seat belt affords maximum protection.

– If the truck has come to a halt the motor is switched off, undo the automatic safety

belt by pressing the red button on the belt buckle. Guide the lock back into the
retractor.

If the belt is retracted too quickly, the lock may activate the automatic locking on the
compartment due to the collision. If the automatic locking is activated, the belt catch
can only be removed with a certain amount of effort. Undo the automatic locking as
follows:

– Pull the belt 10 - 15 mm out of its compartment. You may need to apply a certain

amount of force to do this

– Allow the belt to run back in.
– It should now be possible to remove the belt in the normal manner.

The automatic locking prevents the belt from being removed from the retractor when
the truck is on a sharp incline. The forklift truck must therfore be moved away from
the sharp incline before the seat belt can be attached.

0106

.GB

E 34

5.7

Using the Seat Belt

If a seat belt is attached, always put it on before starting the truck. The belt must be
attached as follows:

– Remove the belt smoothly from the retractor.
– Wrap the belt around you and fit the lock into the buckle. Make sure the belt is not

twisted.

The operator should always sit back as far as possible. This is to protect the
operator’s back as much as possible and the seat belt affords maximum protection.

– If the truck has come to a halt the motor is switched off, undo the automatic safety

belt by pressing the red button on the belt buckle. Guide the lock back into the
retractor.

If the belt is retracted too quickly, the lock may activate the automatic locking on the
compartment due to the collision. If the automatic locking is activated, the belt catch
can only be removed with a certain amount of effort. Undo the automatic locking as
follows:

– Pull the belt 10 - 15 mm out of its compartment. You may need to apply a certain

amount of force to do this

– Allow the belt to run back in.
– It should now be possible to remove the belt in the normal manner.

The automatic locking prevents the belt from being removed from the retractor when
the truck is on a sharp incline. The forklift truck must therfore be moved away from
the sharp incline before the seat belt can be attached.

«
...
67
68
69
70
71
...
»

Содержание DFG 425








































































































Отзывы:

Нет отзывов

Похожие инструкции для DFG 425

Бренд: Toro Страницы: 16

Бренд: Bush Hog Страницы: 42

Бренд: Bush Hog Страницы: 102

Бренд: Bush Hog Страницы: 106

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды