Jungheinrich DFG 425, Руководство по эксплуатации

Страница: 60 / 103

E 2 5
0106
.GB
Reversing
F
Make sure you have sufficient space to
reverse into.
– Set the travel direction switch (27) to
the rear.
Accelerating
– Slowly apply the accelerator pedal
(21) until the truck starts to move
.
– Continue to depress the accelerator.
The motor and travel speedsincrease.
Slowing down the truck
F
The braking pattern of the truck depends
to a large extent on the condition of the
ground. The driver must take this into
consideration when handling the truck.
Carefully brake the truck to prevent the
load from slipping.
Braking
– Take your foot off the accelerator pedal (21).
– Gently depress the slow travel / brake pedal (20).
In the first pedal displacement zone, the flow of force is reduced by the torque
converter.
– Continue to depress the slow travel / brake pedal (20).
As you continue to depress, the truck automatically comes to a halt.
Slow travel with the slow travel / brake pedal
When shunting in confined areas, in order to travel slowly sensitively apply the slow
travel / brake pedal (20).
M
This operating mode can only be used for max. 5 seconds when the engine is running
at high speed.
21
27
20
E 2 5
0106
.GB
Reversing
F
Make sure you have sufficient space to
reverse into.
– Set the travel direction switch (27) to
the rear.
Accelerating
– Slowly apply the accelerator pedal
(21) until the truck starts to move
.
– Continue to depress the accelerator.
The motor and travel speedsincrease.
Slowing down the truck
F
The braking pattern of the truck depends
to a large extent on the condition of the
ground. The driver must take this into
consideration when handling the truck.
Carefully brake the truck to prevent the
load from slipping.
Braking
– Take your foot off the accelerator pedal (21).
– Gently depress the slow travel / brake pedal (20).
In the first pedal displacement zone, the flow of force is reduced by the torque
converter.
– Continue to depress the slow travel / brake pedal (20).
As you continue to depress, the truck automatically comes to a halt.
Slow travel with the slow travel / brake pedal
When shunting in confined areas, in order to travel slowly sensitively apply the slow
travel / brake pedal (20).
M
This operating mode can only be used for max. 5 seconds when the engine is running
at high speed.
21
27
20