Jungheinrich DFG 425, Руководство по эксплуатации

Страница: 54 / 103

E 19
0106
.GB
4.8 Starting procedure for the DFG
– Put the key in the ignition / starter
switch (19).
– Set the ignition / starter key (19) to the
“ I ” position.
– Press the warning switch (26) and test
the horn.
– After setting the ignition / starter (19)
to the I position, the charging current
(3), motor oil pressure (2), neutral
setting (14) and parking brake (5)
indicators and the preheat (13) control
light light up.
– Apply the accelerator pedal (21) fully
and wait until the preheat control light
goes out.
Z
The preheat time depends on the motor
temperature, but normally lasts approx.
4 seconds.
– Set the ignition / starter key now to the
II position.
M
Only apply the starter for a maximum
of15 seconds without interruption.
Before starting again, wait 30-60
seconds and reset the ignition / starter
switch to
0 .
– Release the key as soon as the motor
starts. It automatically returns to the I
position.
M
All indicators lights except for neutral
setting (14) and parking brake (5) should
go out as soon as the motor starts. If not, stop the motor immediately and rectify the
fault.
19 21
13 14
2
5 3
26
27
E 19
0106
.GB
4.8 Starting procedure for the DFG
– Put the key in the ignition / starter
switch (19).
– Set the ignition / starter key (19) to the
“ I ” position.
– Press the warning switch (26) and test
the horn.
– After setting the ignition / starter (19)
to the I position, the charging current
(3), motor oil pressure (2), neutral
setting (14) and parking brake (5)
indicators and the preheat (13) control
light light up.
– Apply the accelerator pedal (21) fully
and wait until the preheat control light
goes out.
Z
The preheat time depends on the motor
temperature, but normally lasts approx.
4 seconds.
– Set the ignition / starter key now to the
II position.
M
Only apply the starter for a maximum
of15 seconds without interruption.
Before starting again, wait 30-60
seconds and reset the ignition / starter
switch to
0 .
– Release the key as soon as the motor
starts. It automatically returns to the I
position.
M
All indicators lights except for neutral
setting (14) and parking brake (5) should
go out as soon as the motor starts. If not, stop the motor immediately and rectify the
fault.
19 21
13 14
2
5 3
26
27