Jungheinrich DFG 425 Скачать руководство пользователя

Страница: 62 / 103

E 27

0106

.GB

5.5

Mast and Attachment Operation

The control levers must only be operated from the driver’s seat.

The lifting device is operated from the control levers on the right-hand side of the
driver's seat.

Lifting/lowering the fork carriage

– Pull the control lever (25) back to raise

the fork carriage.

– Push the control lever (25) forward to

lower the fork carriage.

Tilting the mast forward / backward

When tilting the mast back, keep all
parts of your body from between the
mast and the front wall.

– Pull the control lever (24) back to tilt

the mast back.

– Push the control lever (24) forward to

tilt the mast forward.

Operating attachments:

Attachments are operated via the control
levers (22, 23) to the right of control lever
(24) (mast tilt).

Also follow the manufacturer’s operating
instructions when operating an attach-
ment.

E 27

0106

.GB

5.5

Mast and Attachment Operation

The control levers must only be operated from the driver’s seat.

The lifting device is operated from the control levers on the right-hand side of the
driver's seat.

Lifting/lowering the fork carriage

– Pull the control lever (25) back to raise

the fork carriage.

– Push the control lever (25) forward to

lower the fork carriage.

Tilting the mast forward / backward

When tilting the mast back, keep all
parts of your body from between the
mast and the front wall.

– Pull the control lever (24) back to tilt

the mast back.

– Push the control lever (24) forward to

tilt the mast forward.

Operating attachments:

Attachments are operated via the control
levers (22, 23) to the right of control lever
(24) (mast tilt).

Also follow the manufacturer’s operating
instructions when operating an attach-
ment.

Содержание DFG 425








































































































Результаты поиска

Содержание DFG 425

Отзывы:

Похожие инструкции для DFG 425

Бренды по названию

Популярные бренды

Jungheinrich DFG 425, Руководство по эксплуатации

Результаты поиска

Содержание DFG 425

Отзывы:

Похожие инструкции для DFG 425

Бренды по названию

Популярные бренды