manualshive.com logo in svg

Jungheinrich DFG 425, Руководство по эксплуатации, Страница: 64 / 103

Поделиться
Скачать
Jungheinrich DFG 425 Скачать руководство пользователя страница 64

E 29

0106

.GB

5.6

Collecting, transporting and depositing loads

F

The control levers must only be operated from the driver’s seat.

M

Before picking up a load, the driver must ensure that it is correctly palletised and that
the capacity of the truck is not exceeded.

Note the load diagram

Adjusting the load forks

F

Adjust the load fork in such a way that
both forks are at an equal distance from
the outer edge of the fork carriage and
the load centre of gravity is between the
forks.

– Raise the locking lever (50).
– Push the forks (51) to the correct

position on the fork carriage (52).

– Turn the locking lever down and move

the forks until the locking pin engages
in a slot.

51

50

52

E 29

0106

.GB

5.6

Collecting, transporting and depositing loads

F

The control levers must only be operated from the driver’s seat.

M

Before picking up a load, the driver must ensure that it is correctly palletised and that
the capacity of the truck is not exceeded.

Note the load diagram

Adjusting the load forks

F

Adjust the load fork in such a way that
both forks are at an equal distance from
the outer edge of the fork carriage and
the load centre of gravity is between the
forks.

– Raise the locking lever (50).
– Push the forks (51) to the correct

position on the fork carriage (52).

– Turn the locking lever down and move

the forks until the locking pin engages
in a slot.

51

50

52

Содержание DFG 425








































































































Отзывы:

Нет отзывов