– 56 –
2-19. Copying pattern button
The sewing data of the pattern button No. which has already been registered can be copied to the
pattern button No. which is not registered. Overwriting copy of the pattern button is prohibited. When
you desire to overwrite, perform it after deleting the pattern button once.
/
Refer to
-2-17. Performing pattern button No. selection”
1
Display the data input screen.
Only in case of the data input screen (blue) at the time of
pattern button selection, it is possible to copy. In case of the
sewing screen (green), press READY switch
to display
the data input screen (blue).
2
Call the pattern copy screen.
When PATTERN BUTTON COPY button
A
is pressed,
the pattern button copy (copy source selection) screen is
displayed.
4
Determine the change of item data
For example, input X scale rate. Press
B
to display
the item data input screen. Input the value you desire with the
ten keys or + or – key
K
. When ENTER button
L
is
pressed, the data is determined.
5
Close the pattern button data change screen.
When the change is over, press CLOSE button
M
. The
pattern button data change screen is closed and the screen
returns to the data input screen.
* It can be performed to change the other item data by the same
operation.
In case thread tension is changed in the read state,
the set value when the power is turned OFF without
pressing READY key
or without performing
sewing is not stored in memory.
M
L
K
A
Содержание AMS-210E-1306
Страница 1: ...i ENGLISH INSTRUCTION MANUAL ...
