JUKI AMS-210E-1306, Инструкция по эксплуатации

Страница: 57 / 128

– 53 –
2-17. Performing pattern button No. selection
(1) Selection from the data input screen
1
Display the data input screen.
In case of the data input screen (blue), it is possible to select
the pattern button No. In case of the sewing screen (green),
press READY switch to display the data input screen.
2
Call the pattern button No. selection screen.
When PATTERN BUTTON NO. SELECTION button
A
is pressed, the pattern button No. selection screen is
displayed. Pattern button No. which is selected at present and
the contents are displayed on the upper part of the screen,
and the list of the pattern button No. buttons which have been
registered is displayed on the lower part of the screen.
3
Select the pattern button No.
When UP or DOWN SCROLL button
B
is pressed,
pattern button No. buttons
C
which have been registered are
changed over in order. The contents of sewing data which
have been inputted in the pattern button No. are displayed in
the button. Here, press the pattern button No. button
C
you
desire to select.
4
Determine the pattern button No.
When ENTER button
D
is pressed, the pattern button
No. selection screen is closed and the selection is finished.
However, the pattern buttons which are registered to the
combination sewing cannot be deleted.
* When you desire to delete the pattern button which has been
registered, press DELETE
E
button. However, the
pattern buttons which are registered to the combination sewing
cannot be deleted.
* For the pattern No. to be displayed, press FOLDER
SELECTION
F
button and pattern button Nos. which
have been stored in the specified folder are displayed in the
list. When the folder No. is not displayed, all pattern Nos.
which have been registered are displayed.
A
F
C
B
E
D