JUKI AMS-210E-1306, Инструкция по эксплуатации

Страница: 116 / 128

– 112 –
Error code
How to recover Place of recovery Description of error
Main shaft motor IPM abnormality
When IPM of servo control p.c.b. is abnormal.
Stepping motor power abnormality
When stepping motor power of SERVO CONTROL p.
c. b. fluctuates more than ± 15%.
Solenoid power abnormality
When solenoid power of SERVO CONTROL p. c. b.
fluctuates more than ± 15%.
Heat sink temperature for SERVO CONTROL p. c.
b. abnormality
Turn ON the power again after taking overheat time
of SERVO CONTROL p. c. b.
X feed motor origin retrieval error
When origin sensor signal is not inputted at the time
of origin retrieval motion.
Y feed motor origin retrieval error
When origin sensor signal is not inputted at the time
of origin retrieval motion.
Presser motor origin retrieval error
When origin sensor signal is not inputted at the time
of origin retrieval motion.
E913
E914
E915
E916
E901
E903
E904
E905
E907
E908
E910
Thread clamp origin retrieval error
When origin sensor signal is not inputted at the time
of origin retrieval motion.
Feed defective error
Timing lag between feed and main shaft occurs.
Communication abnormality between operation
panel and MAIN CPU
When abnormality occurs in data communication.
Communication abnormality between MAIN CPU
and main shaft CPU
When abnormality occurs in data communication.
Turn OFF
the power.
Turn OFF
the power.
Turn OFF
the power.
Turn OFF
the power.
Turn OFF
the power.
Turn OFF
the power.
Turn OFF
the power.
Turn OFF
the power.
Turn OFF
the power.
Turn OFF
the power.
Turn OFF
the power.