JUKI AMS-210E-1306, Инструкция по эксплуатации

Страница: 41 / 128

– 37 –
1
Display the sewing screen.
Display the data input screen (blue) and press READY key
A
. Then the back-light of LCD changes to green and
sewing is possible.
4
Proceed stitching with the presser lowered.
Check the shape with PRESSER BACK button
C
and
PRESSER FORWARD button
D
.When the button is
held pressed for a fixed period of time, the presser continues
to move even when the button is detached.
When you desire to stop, press STOP button
G
.
When RETURN TO ORIGIN button
F
is pressed, the
presser moves to the origin.
5
Finish checking the shape.
When CANCEL button
E
is pressed, the screen returns
to the sewing screen. When the checking of the shape is
not in the position of the start of sewing or that of the end of
sewing, press the foot switch. Then it is possible to sew from
the midway of checking.
The sewing machine does not start even when the
foot switch is depressed with this mode.
2
Display the step sewing screen.
When STEP SEWING button
B
is pressed, the step
sewing screen is displayed.
3
Lower the presser with the foot switch.
WARNING :
Make sure without fail of the contour of the sewing pattern after selection of the sewing pattern.
If the sewing pattern extends outside the work clamp feet, the needle will interfere with the work
clamp.
2-7. Checking pattern shape
The presser does not come down immediately
after turning ON the power.
A
B
E
D
F
G
C