– 35 –
1
Display the data input screen.
In case of the data input screen, the change of item data can
be changed. In case of the sewing screen (green), press
READY switch
to display the data input screen (blue).
* Thread tension value can be changed even in the
sewing screen.
2
Display the item data input screen.
When the button of the item data you desire to change is
pressed, the item data input screen is displayed.
Item data are 5 items below.
*
A
Scale rate in X direction and
B
Scale rate in Y direction can be changed to actual size value
input by selection of the memory switch
.
For enlargement and reduction, there are two ways. the data already read in can enlarge or reduce
repeatedly with this button. When you desire to enlarge or reduce again from the original data, see
-2-5. Performing sewing shape selection"
* When X or Y enlarging/reducing ratio is individually set in case of circle, arc and spline, the sewing
is changed to the point sewing and the pitch becomes uneven.
In this case, set and read the X or Y enlarging/reducing ratio in the pattern list screen.
* Max. input range and initial value of max. speed limitation
D
are determined with memory switch
.
* Change of the intermediate presser height cannot be performed immediately after turning ON the
power. Use the machine after pressing READY key
and performing the origin retrieval.
The setting exceeding 100% is dangerous since needle and the cloth presser
interferes with each other and needle breakage or the like will occur.
Item range
Scale rate in X direction
Scale rate in Y direction
Thread tension
Max. speed limitation
Intermediate presser heigh
t
Input range
1.0 to 400.0 (%)
1.0 to 400.0 (%)
0 to 200
400 to 2,700 (rpm)
0.0 to 3.5 (mm) (Max 0.0 to 7.0 (mm))
Initial value
100.0 (%)
100.0 (%)
50
2,700 (rpm)
0.0 (mm)
A
B
C
D
E
A
B
D
C
E
2-6. Changing item data
Содержание AMS-210E-1306
Страница 1: ...i ENGLISH INSTRUCTION MANUAL ...
