JUKI AMS-210E-1306, Инструкция по эксплуатации

Страница: 43 / 128

– 39 –
(2) Changing the intermediate presser height value
Press INTERMEDIATE PRESSER button
A
in the
sewing screen to display the intermediate presser foot height
reference value setting screen.
Press INTERMEDIATE PRESSER SELECTION button
B
to display the intermediate presser height increase/
decrease value selection screen.
When
C
is pressed, the intermediate presser height
increase/decrease value selection screen is displayed.
With
D
or
E
, needle moves by one stitch in front
or rear in the state that the presser is lowered.
With
F
or
G
, needle moves to the needle entry
point where there is the intermediate presser command in
front or rear.
When you desire to stop, press STOP button
H
.
When RETURN TO ORIGIN button
I
is pressed, the
presser moves to the origin.The value which is displayed
is the absolute value (intermediate presser height value +
intermediate presser increase/decrease value).
Input the value you desire with TEN keys and +/– keys
J
.
When ENTER button
K
is pressed, the data is
determined.
1. When checking the needle, or performing the
feed forward or backward, the machine fails
to work unless the presser is lowered. Use the
machine after lowering the presser.
2. When increasing the height of intermediate
presser or making the needle size thicker,
confirm the clearance between the wiper and
the components. Wiper cannot be used unless
the clearance is secured. In this case, turn OFF
the wiper switch, or change the set value of
memory switch U105.
B
A
K
J
C
D
F
H
G
E
I