![background image](http://html.mh-extra.com/html/juki/ams-210e-1306/ams-210e-1306_instruction-manual_2029610092.webp)
– 88 –
3-7. Operation of CP-20 (Advanced)
(1) Performing sewing using the pattern keys (
,
,
,
and
)
When registering the patterns already registered (No. 1 to 200) to P1 to P25, calling of the pattern can
be performed with one-touch without selecting by scrolling of pattern No.
It is possible to change and register enlargement/reduction ratio, max. speed limitation, thread tension,
and sewing position.
* When selecting P6 to P25, perform the selection by combination of
,
,
,
and
keys as shown in the table below.
P-No. Selection key P-No. Selection key P-No. Selection key P-No. Selection key
P1
P1
P8
P1+P4
P15
P4+P5
P22
P2+P3+P4
P2
P2
P9
P1+P5
P16
P1+P2+P3
P23
P2+P3+P5
P3
P3
P10
P2+P3
P17
P1+P2+P4
P24
P2+P4+P5
P4
P4
P11
P2+P4
P18
P1+P2+P5
P25
P3+P4+P5
P5
P5
P12
P2+P5
P19
P1+P3+P4
P6
P1+P2
P13
P3+P4
P20
P1+P3+P5
P7
P1+P3
P14
P3+P5
P21
P1+P4+P5
4) Press
key. (Select P-No. to be
registered.) Selection can be performed with
or
key.
5) Press
key to indicate the Pattern No
. Set the Pattern No. to "3" with
or
key.
(2) Register to the pattern key
Setting example : Register following setting to the P2., Pattern No. 3, X scale rate : 50%, Y Scale rate :
80%, Max. speed limitation : 2,000 rpm, Thread tension : "50", Pattern position : 0.5 mm to the right and
1 mm to the front
1) Turn ON the power switch and press
key to enter mode setting (memory switch
setting). (Sewing LED should be put out.)
3) Press
key.
Enter the pattern register mode.
When the space after P1 is blank,
the data is in the registered state.
When the space after P1 is “- -”,
the data is not in the registered
state.
2) Indicate the pattern register mode with
or
key.
〜
Содержание AMS-210E-1306
Страница 1: ...i ENGLISH INSTRUCTION MANUAL ...