– 82 –
(3) Performing modification of the needle entry point
When commands of thread tension or intermediate presser height exist in the needle entry point of the
shape confirmation and during temporary stop, those values can be modified.
• Changing the thread tension reference value
1) Press
key in the ready state to select
the thread tension.
2) Press
key for 5 seconds or more with
the feeding frame lowered.
3) The sewing LED lights up and thread tension
LED flashes on and off.
4) Set the thread tension reference value with
key or
key.
• Changing the thread tension command
value
1) Press
key in the aforementioned
reference value change state.
2) Both the sewing LED and the thread tension
LED flash on and off.
3) Continue stitching with
key or
key.
4) "C" is displayed when there is the thread
tension command in the current needle entry
point.
5) Pressing
key, set the thread tension
command value with
key or
key.
6) When ending the setting, press
key.
When checking the needle, or performing the feed forward or backward, the machine
fails to work unless the presser is lowered. Use the machine after lowering the
presser.
h
h
+
h
Содержание AMS-210E-1306
Страница 1: ...i ENGLISH INSTRUCTION MANUAL ...
