JUKI AC-172N-1790, Инструкция по эксплуатации

Страница: 55 / 102

− 51 −
1-7. Using the counter
3
Change of counter set value
Press ITEM SELECTION key
!0
to make counter set value C flash on and off. Press DATA
CHANGE key
!1
and nput the set value untl count-up s reached.
4
Change of existing counter value
Press ITEM SELECTION key
!0
to make exstng counter value D flash on and off.
Press RESET key
3
and the value on the way of countng can be cleared.
In addton, t s possble to edt the numercal value wth DATA CHANGE key
!1
.
[Kind of counter]
[Sewing UP counter]
Every tme the sewng of one shape s performed, the exstng value s counted up. When the exst-
ng value s equal to the set value, count-up screen s dsplayed.
[Sewing DOWN counter]
Every tme the sewng of one shape s performed, the exstng value s counted down. When the
exstng value s reached to "0", count-up screen s dsplayed.
[No. of pcs. UP counter]
Every tme one cycle or one contnuous sttchng s performed, the exstng value s counted up.
When the exstng value s equal to the set value, count-up screen s dsplayed.
[No. of pcs. DOWN counter]
Every tme one cycle or one contnuous sttchng s performed, the exstng value s counted down.
When the exstng value s reached to "0", count-up screen s dsplayed.
[Counter not used]
E
2
A
1
B
!0 !1
C
D
9
5
Count-up releasing procedure
When count-up condton s reached durng sewng
work, the whole count-up screen E flashes on and
off. Press RESET key
3
to reset the counter,
and the mode returns to the sewng mode. Then the
counter starts countng agan.
3
1
Call counter setting screen.
Press COUNTER key
9
under the nput
mode, and counter screen A s dsplayed. Then
settng s possble. Settng of the counter value
can be performed only wth the nput mode
(back-lght of LCD dsplay
1
s blue). In case of
the sewng mode (back-lght of LCD dsplay
1
s green), press READY key
2
to set the
mode to the nput mode.
2
Selection of kinds of counters
Press ITEM SELECTION key
!0
to
make pctograph B showng the knd of counter
flash on and off. Press DATA CHANGE key
!1
, and select the counter you desre from
among the knds of counters below.