JUKI AC-172N-1790, Инструкция по эксплуатации

Страница: 73 / 102

− 69 −
No.
Item Settng range Edt unt Remarks
S60 ACT timing adjustment at the start of right
overedging
Ths tem adjusts needle thread tenson output start
tmng at rght overedgng secton.
–5 to 5 1 sttch *2
S61 ACT timing adjustment at the start of 2nd
bar-tacking
Ths tem adjusts needle thread tenson output start
tmng at 2nd bar-tackng secton.
–5 to 5 1 sttch *2
S62 Number of stitches of tie stitching at the
start of sewing
Ths tem sets number of sttches of te sttchng at
the start of sewng.
0 to 8 1 sttch -
S63 Sewing pitch of tie stitching at the start of
sewing
Ths tem sets sewng ptch of te sttchng at the
start of sewng.
0.00 to 0.70 0.05mm *2
S64 Tie stitching width at the start of sewing
Ths tem sets te sttchng wdth at the start of sew-
ng.
0.0 to 3.0 0.1mm -
S65 Lengthwise compensation of tie stitching
at the start of sewing
Ths tem sets start poston of te sttchng n length-
wse drecton at the start of sewng.
0.0 to 5.0 0.1mm *2
S66 Crosswise compensation of tie stitching
at the start of sewing
Ths tem sets start poston of te sttchng n cross-
wse drecton at the start of sewng.
0.0 to 2.0 0.1mm *2
S67 Tie stitching width at the end of sewing
Ths tem sets te sttchng wdth at the end of sew-
ng.
0.1 to 1.5 0.1mm -
S68 Number of stitches of tie stitching at the
end of sewing
Ths tem sets number of sttches of te sttchng at
the end of sewng.
0 to 8 1 -
S69 Lengthwise compensation of tie stitching
at the end of sewing
Ths tem sets start poston of te sttchng n length-
wse drecton at the end of sewng.
0.0 to 5.0 0.1mm *2
S70 Crosswise compensation of tie stitching at
the end of sewing
Ths tem sets start poston of te sttchng n cross-
wse drecton at the end of sewng.
0.0 to 2.0 0.1mm *2
S81 Knife motion
Ths tem sets "Wth/wthout moton" of normal cloth
cuttng knfe.
- - -
: Normal knife
motion OFF
: Normal knife
motion ON
S83 Knife motion at 1st cycle of double stitching
Ths tem sets "Wth/wthout moton" of cloth cuttng knfe at 1st
cycle when double sttchng s performed.
- - *2, *3
: Normal knife
motion OFF
: Normal knife
motion ON