JUKI AC-172N-1790, Инструкция по эксплуатации

Страница: 9 / 102

– 5 –
1) Insert ar hose
1
nto one-touch jont
2
suppled
with this unit, and fix it using metal fittings or the
lke.
2) Insert one-touch jont
2
nto jont
3
untl t clcks.
3) Set the ar pressure gauge to 0.5 MPa. To adjust,
rase knob
5
of regulator
4
n drecton
A
, and
turn knob
5
clockwse (drecton
C
) to ncrease
the ar pressure, or turn the knob counter-clock-
wse (drecton
D
) to decrease the ar pressure.
4) When the ar pressure gauge has been set to 0.5
MPa press knob
5
n drecton
B
untl t clcks.
The sound ndcates that the gauge has locked.
When bottle
6
is filled with water, be sure
to drain off the water by removing one-
touch joint
2
from regulator
4
, and by
pressing drain button
7
.
Drain off the water every time the ma -
chine is used , either before or after op -
eration.
1) Check to be sure that the power supply n use s
200 to 240 VAC.
2) First confirm that power switch in “OFF”, then
connect the power cord to the power supply.
3) Turn the power ON. Check that the blower motor
s rotatng.
The sewing machine is not provided with
a terminal block or the like for changing
over the voltage. As long as the power
supply in use is in the range of 200 to 240
VAC, the sewing machine can be directly
connected to the power supply.
3-2. Connecting the power supply
3-3. Installing the air hose
5
C
D
B
A
3
2
1
4
6
7