− 75 −
(2) Method of editing continuous stitching data
C
1
8
D
2
!0
1
Set the mode to the input mode.
When the back-lght of LCD dsplay
1
shows
the nput mode n blue color, t s possble to se-
lect contnuous sttchng data. When the back-
lght shows the sewng mode n green color,
press READY key
2
to change over to
the nput mode.
2
Call continuous stitching data No. to edit.
Press PATTERN No. key
7
to call pattern
selecton screen
A
, and pattern No.
B
whch s
selected at present flashes on and off. Press ITEM
SELECTION key
!0
, and patterns
whch have been regstered are changed over and
dsplayed n order. Cycle data No. and contnuous
sttchng data No. whch have been regstered af-
ter the last pattern No. are dsplayed. Here, select
the contnuous sttchng No. whch you desre to
sew.
7
!1
3
Set continuous stitching data to editing status.
Press DATA key
8
, and contnuous sttchng data edtng dsplay
C
appears. Pattern No.
D
whch
s
sewn first flashes on and off. In this state, it is possible to edit the data.
4
Select editing point.
Press ITEM SELECTION key
!0
, and edtng pont moves n order of "pattern No.
/
jump feed
mount
/
pattern No.
/
jump feed amount" and flashes on and off. When moving the editing point up to
the last data, addtonal ndcaton pctograph s dsplayed.
5
Change data of selected editing point.
Press DATA CHANGE key
!1
, and data of edtng pont can be changed.
When the edtng pont s at the pattern No. :
Pattern No. whch has been regstered s dsplayed and t s possble to select.
When the edtng pont s at the jump feed :
It s possble to edt numercal value wthn the range of ±120 mm. In addton, press RESET key
3
and the pattern data of edtng pont can be deleted.
Repeat steps
4
and
5
to perform edtng data.
* Input is completed by the steps above. For the continuous stitching, however, input all data
within the range of the presser size. Error message will be shown when the data exceeds the
range. Be sure to precisely input the presser size.
/
Содержание AC-172N-1790
Страница 1: ...AC 172N 1790 INSTRUCTION MANUAL ENGLISH ...
