JUKI AC-172N-1790, Инструкция по эксплуатации

Страница: 58 / 102

− 54 −
1-9. Copying the AC pattern
The data whch has already been regstered to a pattern number can be coped to another pattern num-
ber whch s not used. Pattern copyng by overwrtng s prohbted. If you want to overwrte an exstng
pattern, it is necessary to erase the existing pattern first.
1
Placing the sewing machine into the input
mode
Copyng s enabled only when the backlght of
LCD
1
s blue, .e., under the nput mode. If the
backlght s green, .e., under the sewng mode,
press READY key
2
to change over the
mode to the nput mode.
2
Selecting the source pattern number for
copying
Select the source pattern number for copyng
on the pattern selecton screen.
/
Refer to "
@
-2-2. Performing pattern selec -
tion" p.46 .
3
Calling the copy screen
Press COPY key
@3
to dsplay the copy
screen A .
4
Selecting the destination pattern number for
copying
Pattern No. B which is not used flashes on and
off. Press DATA CHANGE key
!1
to
select the destnaton pattern number for copy-
ng.
To erase the pattern, select the Recycle Bn.
5
Starting copying
Press READY key
2
to start copyng.
Two seconds later, the screen s restored to the
nput screen wth the pattern number created by
copyng selected.
If RESET key
3
s pressed, the screen
s restored to the prevous one wthout carryng
out copyng.
@3
2 3
A
1
Destination
pattern for
copying
B : Source
pattern for
copying.
!1