JUKI AC-172N-1790, Инструкция по эксплуатации

Страница: 34 / 102

– 30 –
(Cotton thread, spun thread)
(2) Threading the needle-thread
(1) Inserting the needle
Hold needle wth ts recessed part facng toward the operator sde A,
nsert the needle fully nto the needle clampng hole, and tghten nee-
dle setscrew
1
. Use a DPx5-(#11J, #14J).
When attaching the needle, turn OFF the power to the mo -
tor.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
Pass the needle thread n the order
1
to
!2
as shown in the figures.
The threadng can be done easly by usng the needle threader suppled wth the machne.
Change the thread gude threadng method accordng to the thread to be used.
(Synthetic filament thread)
1
7
3
2
6
8
5
9
!0
4
!1
!2
1
A
4-2. Operation of the sewing machine
!2