JUKI AC-172N-1790, Инструкция по эксплуатации

Страница: 38 / 102

– 34 –
1. The line on the leftmost of the right-side scale is aligned with the center of the needle which
corresponds to the sewing start position of the first buttonhole (the bottom end of the button -
hole) of garment body of men’s wear.
2. The line on the rightmost side of the left-side scale corresponds to the sewing start position of
the first buttonhole (the top end of the buttonhole) of garment body of ladies’ wear.
3. For the changeover of men's wear / ladies' wear, refer to "
@
-1-10. Changeover of men's and
ladies' wear" p. 55 .
4. For the setting procedure of the material, refer to "
!
-5. OPERATION" p. 39 .
1) Adjust the seam allowance from the sde end of
the garment to the buttonhole (dstance
A
n the
figure), and from the top end the garment to the
1
st
buttonhole (dstance
B
,
B
’ in the figure). The
number of buttonholes and the ntervals between
the buttonhole can be adjusted usng the panel
swtches.
Be sure to make adjustment of the seam
allowance after you have turned OFF the
power switch.
■ Adjusting distance
A
1) Turnng preset adjustng knob
1
clockwse wll decrease ds-
tance
A
, or counter clockwse wll ncrease t.
2) Read the requred dstance on scale
2
and marker
3
. Then
turn the knob until it reaches the specified value.
3) Dstance
A
can be adjusted wth the range from 7 to 21 mm.
4) When dstance
A
cannot be set to the value ndcated on the
scale, loosen the screws
5
, which fix scale plate (the plate has a
screw on both sdes), and re-adjust the poston of the scale plate
properly. (Refer to the Fg. "Adjustment of dimension
B
. " )
5) After the adjustment, return the knob n the tool box to prevent t
from beng lost.
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
■ Adjusting distance
B
1) Loosen thumb screw
3
of gauge
2
on preset
board
1
, and move the board to the value set
on scale
4
.
2) Settng the materal so that top end
C
of the
materal comes nsde
D
of the marker wll
complete the postonng of the materal. (When
sewng lades’ wear, determne the poston of
the materal usng the scale marker on the left
sde of the preset board whle followng the same
procedure as the above.)
(Men's garment
body)
(Ladies' garment
body)
Scale
set plate
Needle
Men’s garment body
Ladies’ garment body
1
2
3
1
C
C
5
4
2 3
D
D
B
5
2 3
B
'
A
C
B
A
C
B
'
4-3. Adjusting the seam allowance