JUKI AC-172N-1790, Инструкция по эксплуатации

Страница: 89 / 102

− 85 −
E488 Flow bar-tacking compensation error
When bar-tackng length s too short to form the shape
in case of flow bar-tacking shape.
Possble to
re-start after
reset.
Sewng data
nput screen
[S08]
E489 Knife size error (at the time of plural motions of
knife)
When knfe sze s larger than cloth cuttng knfe sze.
Possble to
re-start after
reset.
Sewng data
nput screen
[S02]
E492 Presser size over of basting
When sttchng data of bastng exceeds presser
sze.
Possble to
re-start after
reset.
Sewng data
nput screen
[S40]
E493 Presser size over of tie stitching at sewing end
When sttchng data of te sttchng at sewng end ex-
ceeds presser sze.
Possble to
re-start after
reset.
Sewng data
nput screen
[S67]
E494 Presser size over of tie stitching at sewing start
When sttchng data of te sttchng at sewng start
exceeds presser sze.
Possble to
re-start after
reset.
Sewng data
nput screen
[S64]
E495 Presser size error (Width direction : right only)
When sttchng data exceeds the sze of rght only of
wdth drecton of presser.
Possble to
re-start after
reset.
Sewng data
nput screen
[S03]
[S06]
E496 Presser size error (Width direction : left only)
When sttchng data exceeds the sze of left only of
wdth drecton of presser.
Possble to
re-start after
reset.
Sewng data
nput screen
E497 Presser size error (Length direction : front)
When sttchng data exceeds the sze of front of
length drecton of presser.
Possble to
re-start after
reset.
Sewng data
nput screen
E498 Presser size error (Width direction : right and left)
When sttchng data exceeds the sze of both rght and
left of wdth drecton of presser.
Possble to
re-start after
reset.
Sewng data
nput screen
[S05]
E499 Presser size error (Length direction : rear)
When sttchng data exceeds the sze of rear of length
drecton of presser.
Possble to
re-start after
reset.
Sewng data
nput screen
[S02]
E703 Panel is connected to the machine other than sup -
posed. (Machine type error)
When machne type code of system s mproper n
case of ntal communcaton.
Possble to
rewrte program
after pressng
down commun-
caton swtch.
Communcaton
screen
E704 Nonagreement of system version
When verson of system software s mproper n case
of ntal communcaton.
Possble to
rewrte program
after pressng
down commun-
caton swtch.
Communcaton
screen
E730 Main shaft motor encoder defectiveness or phase-
out
When encoder of sewng machne motor s abnormal.
Turn OFF the
power.
-
E731 Main motor hole sensor defectiveness or position
sensor defectiveness
When hole sensor or poston sensor of sewng ma-
chne s defectve.
Turn OFF the
power.
-
Error
code
Descrpton of error
How to
recover
Place of
recovery