JRC JMR-5410-4X, Инструкция по эксплуатации

Страница: 97 / 688

2-1 Section 2 Name and Function of Each Unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
Section 2
Name and Function of
Each Unit
2.1 Name and Main Function of the
Operation Unit
2.1.1 Standard operation unit
When turning off the power supply, do not hold down the power button of
the operation unit.
Otherwise, a trouble may occur due to termination failure.
No. Name Function outline
1 Power supply button Use this button to turn on and off this equipment.
2
[RAIN] dial • When this dial is turned, the level of rain/snow clutters on the radar image is
adjusted.
• When this dial is pressed, the function mode is switched to manual/automatic.
3
[SEA] dial • When this dial is turned, the level of sea clutters on the radar image is adjusted.
• When this dial is pressed, the function mode is switched to manual/automatic.
4
[GAIN] dial • When this dial is turned, the gain of the radar image is adjusted.
• When this dial is pressed, the transmission pulse width is switched.
5 [MULTI] dial • Turn this dial to operate the function that is assigned to the [MULTI] dial such as
the Display Brightness function.
• If the [MULTI] dial is held down, the Display Brightness function is assigned to
the [MULTI] dial forcibly.
6 USB terminal Connects a USB flash memory.
7 [SILENCE] key Stops the alert buzzer.
8 [ALERT ACK] key Acknowledging the alert.
9 [RANGE -]
(zoom-in) key
• This key contracts the observation range by one level.
• When this key is held pressed, setting will step continuously until released.
10 [RANGE +]
(zoom-out) key
• This key expands the observation range by one level.
• When this key is held pressed, setting will step continuously until released.
[1] [2]
[3]
[6]
[4] [5]
[7]
[8]
[9] [10]
[11] [12]
[13] [14] [15]
[16]
[17] [18]
[19] [20]
[21] [22] [23]
[24]
[25]