JRC JMR-5410-4X Скачать руководство пользователя страница 16

Страница: 16 / 688

xiv

Change of the colour of the Day/Night button, particularly the use of the

[Night] colour, may interfere with the recognition of display information.
Confirm display information can be recognised.

When moving the dialogue box, move to the position that does not cover the

operation area. If the dialogue box covers the operation area, it may interfere

the recognition of the display information.

In the short distance range, do not set the sea clutter suppression function so

that all reflections from the sea are suppressed. This suppresses not only the

echo from waves, etc., but also the echo from floating objects such as ships

or dangerous objects, etc., and obstructs their detection.
When using the sea clutter suppression function, always make the best

suppression setting.

Do not set the rain/snow clutter suppression setting to an excessive level,

because not only the echo from rain or snow but also the echo from floating

objects such as ships or dangerous objects, etc., and obstructs their

detection.
When using the rain/snow clutter suppression function, always make the best

suppression setting.

When setting a guard zone, make sure to properly adjust gain, sea-surface

reflection suppression level, and rain/snow reflection suppression level so

that the optimal target images are always on the radar screen. The guard

zone alarm will not be activated for targets undetected by the radar, and it

may result in accidents such as collisions.

Since these alarms may include some errors depending on the target tracking

conditions, the navigation officer himself should make the final decision for

ship operations such as collision avoidance.
Making the final navigation decision based only on the alarm may cause

accidents such as collisions.

Do not turn off the power during Backup/Restore.

Otherwise, a function may fail, and an accident may occur.

Do not turn off the power supply during recovery of C drive image.
Otherwise, a function fault occurs, causing an accident.

Specify the power source type, taking into account the ship's mains. In the

case of using the ship's mains of 440VAC, it may be necessary as a

step-down transformer. Improper order or using may result in a fire or

accidents.

Содержание JMR-5410-4X

















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание JMR-5410-4X

Отзывы:

Похожие инструкции для JMR-5410-4X

Бренды по названию

Популярные бренды

JRC JMR-5410-4X, Инструкция по эксплуатации

Результаты поиска

Содержание JMR-5410-4X

Отзывы:

Похожие инструкции для JMR-5410-4X

Бренды по названию

Популярные бренды