JRC JMR-5410-4X Скачать руководство пользователя страница 18

Страница: 18 / 688

xvi

Use the radar only as a navigation aid.

The final navigation decision must always be made by the operator

him/herself.

Making the final navigation decision based only on the radar display

information may cause accidents such as collisions or running aground.

A malfunction as the screen is disordered or unshown may occur if the power

in the ship is instantaneously interrupted during operation of the radar. In this

case, the power should be turned on again.

The simulation function is used exclusively for deciding whether or not target

tracking is properly operating. Therefore, never use this function unless you

wish to check target tracking operations.

Note especially that, if this function is used during actual navigation,

simulated targets are displayed and may become confused with other actual

targets. Therefore, never use this function during actual navigation.

Optimal values have been set for VD Level and Constant; therefore, never

change their values unless absolutely necessary. Failure may result in

accidents that would lower target tracking performance.

When replacing magnetrons, make sure to shut off the main power and let the

equipment stand for more than 5 minutes to discharge the high-voltage

circuit.

Failure may result in electric shock.

Make sure to take off your watch when your hand must get close to the

magnetron.

Failure may result in damage to the watch since the magnetron is a strong

magnet.

Do not make any adjustments during navigation.

Failure may result in adverse effects on the radar function which may lead to

accidents or equipment failure.

Do not change the quantization level settings unless absolutely necessary.

If set at an inappropriate value, the acquisition of target tracking function and

the tracking function deteriorate, and this may lead to accidents.

Do not use or leave the equipment under direct sunlight for a long time or in

the temperatures above 55°C.

Otherwise, a fire or a malfunction may occur.

Do not place a glass or cup containing water, etc., or a small metal object on

this equipment.

If water or such object gets inside, a fire, an electric shock, or a malfunction

may occur.

Содержание JMR-5410-4X

















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание JMR-5410-4X

Отзывы:

Похожие инструкции для JMR-5410-4X

Бренды по названию

Популярные бренды

JRC JMR-5410-4X, Инструкция по эксплуатации

Результаты поиска

Содержание JMR-5410-4X

Отзывы:

Похожие инструкции для JMR-5410-4X

Бренды по названию

Популярные бренды