JRC JMR-5410-4X, Инструкция по эксплуатации

Страница: 174 / 688

Section 3 Common Basic Operations 3-48
3.24 Using a Key Macro
This function enables the recording of a key operation and by calling the recorded operation, automatic
operation can be performed.
3.24.1 Recording a key macro
A key operation can be recorded for each user key. Under the connection with the standard operation
unit, up to two key macros can be recorded.
[Operation procedure]
Perform the following menu operation to open the key macro registration screen.
[Menu] button
→
Tools
→
Record Operation
Memo
When the RADAR transmission state is Transmit, “Record Operation” cannot be selected.
The following table shows the items that are displayed on the macro registration screen.
Item Contents
User Key No. Select a user key number to be registered. Only the numbers of the user
keys to which a key macro is assigned are displayed.
Name Set a macro name. A character string of up to 16 characters can be
specified. A null character cannot be specified.
[Record] button Executes the recording of the key operation.
[Exit Operation Record]
button Closes the key macro registration screen. This function does not stop the
recording of the key operation.
Operation List
No. Displays the key operation number.
Operation Displays the key operation that has been recorded.
The key macro recording procedure is shown below.
1
Open the [Record Operation] screen and select a user key to be recorded from the
[User Key No.] combo box.
2
Enter a name of the macro in the [Name] input box. The default name is “Operation X
(X: user key number)”.
3
Press the [Record] button. The recording of the key operation starts.
If another key operation has already been recorded in the selected user key, the key operation
already recorded will be cleared when the [Record] button is pressed.
4
Execute the key operation to be recorded.
Only the key operations including right-clicking and left-clicking can be recorded in key macros
and rotation/pressing of a trackball or dial is not recorded. User keys and power supply buttons
are not recorded either.
5
At completion of key operation, press the [MULTI] dial. This terminates the recording
of key operation.
Up to 10 key operations can be recorded. Recording also terminates when the number of key
operations reaches 10.