JRC JMR-5410-4X Скачать руководство пользователя страница 7

Страница: 7 / 688

Flow of Cardiopulmonary Resuscitation (CPR)

Check for response.

Call while tapping the shoulder.

Breathing

Not responding or indeterminate state

Ask for help.

Make an emergency call.

Ask to bring an AED.

Listen to the appeal of the injured

or ill person and give the

necessary first-aid treatment.

Responding

Automatic electrocardiogram analysis

Do not touch the injured or ill person.

Electric shock is needed.

Electric shock is not needed.

Delivery of electric shock.

Resume CPR from chest

compressions by following the

voice prompts of the AED.

When the injured or ill

person has been

handed over to the

emergency services or

has started moaning or

breathing normally, lay

him/her on his/her side

in a recovery position

and wait for the arrival

of emergency services.

When to stop CPR

A person is collapsing.

- Secure the safety of the surrounding area.

- Prevent secondary disasters.

The AED

automatically

analyses the

heart rhythm

every 2 min.

Recovery position
- Lay the injured or ill person on
his/her side and wait for the
arrival of the emergency
services.

If you call an ambulance, you can get instructions

regarding how to judge cardiac arrest and how to do

cardiopulmonary resuscitation (CPR).

Not breathing or indeterminate state

Check for breathing and judge for cardiac arrest.

Check for breathing.

Chest compressions

- With each compression, depress the chest

wall to a depth of approximately 5 cm.

- Perform compressions at the rate of about

100 - 120 times per minute.

Combination of chest compressions and

rescue breaths Note(1)

- If the first-aiders is not trained in rescue

breaths, he/she should perform only chest

compressions. See Note(1) for the details.

Note(1) Combination of chest compressions and

rescue breaths

- If the first-aider is not trained in rescue breaths,

he/she should perform only chest compressions.

- If the first-aider is trained in rescue breath, and has

the skill and will to do it, he/she should perform the

combination of chest compressions and rescue

breaths at the ratio of 30:2. If there is a fear of

infection, he/she should use a personal protective

equipment (mouthpiece for rescue breathing).

Arrival of an AED

Turn on the power.

- Use the AED by following its voice prompts.

Fitting of the electrode pads, etc.

Содержание JMR-5410-4X

















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание JMR-5410-4X

Отзывы:

Похожие инструкции для JMR-5410-4X

Бренды по названию

Популярные бренды

JRC JMR-5410-4X, Инструкция по эксплуатации

Результаты поиска

Содержание JMR-5410-4X

Отзывы:

Похожие инструкции для JMR-5410-4X

Бренды по названию

Популярные бренды