Johnson Controls YORK YK MaxE, Руководство по эксплуатации

Страница: 94 / 184

JOHNSON CONTROLS
94
FORM 160.54-O1
sUrge Map sCreeN - List View
(Software version C.OPT.01.19.307 and later)
oVerVieW
The surge map can be shown in either TABLE (default)
or LIST view as selected with the Map View key.
Shown above is the LIST view. In this view, the Delta
P/P, Pre-rotation vanes position and VSD output fre-
quency of each mapped point are listed. It is the same
report that is generated when the surge map is printed to
a printer. Therefore, this view cannot be selected while a
print is in progress. If the Surge Map key is pressed on
the ACC Details Screen while a print is in progress, the
Map View is reset to TABLE if it is set to LIST.
The PAGE UP and PAGE DOWN keypad keys are used
to scroll to the previous or next list of parameters.
This screen is applicable to Variable Speed Drives (VSD)
(with the Motor Communications Protocol setpoint set
to MODBUS; ACC Board is not present) and Medium
Voltage Variable Speed Drives (MV VSD). It is not
accessible if equipped with a VSD in YORK Motor
Communications Protocol Setpoint configuration (ACC
Board is present).
optiView Control Center
LD13833
fig. 22d
Requires login access level of SER-
VICE. Service technicians refer to
yoRK Service Manual 160.54-M1 for
operation instructions and explanation
of all programmable setpoints and
displayed values.
prograMMaBLe
Map View
Allows the Service Technician to change the view from
LIST to TABLE.
Page Up
This key scrolls the contents of the view window up to
the previous list of parameters. If the window cannot be
scrolled up, this key will not be displayed.
Page Down
This key scrolls the contents of the view window to the
next list of parameters. If the window cannot be scrolled
down, this key is not displayed.