Johnson Controls York Smart Equipment SC-EQ, Руководство по установке

Страница: 43 / 52

JOHNSON CONTROLS
43
FORM 450.50-N1
ISSUE DATE: 08/19/2019
5
TABLE 8 - TECHNICAL SPECIFICATIONS
Power Requirements
External to Equipment (Inside Enclosure): 120/240 VAC Primary 50/60 Hz, 24
VAC Secondary Transformer (+10%/-15%), 400 mA, Nominal 12 VA
Internal to Equipment SC-EQ Comm Card Assembly: 24 VAC (±15%), 50/60
Hz, 400 mA, Nominal 12 VA, 12 VDC (+50%/-2%), 400 mA, Nominal 12 VA
Addressing
Addressing is selectable by the MAC Address Switch – 8 Position DIP Switch
using Switches 1 through 7.
• BACnet MS/TP Addressing Range 1 to 127
• Modbus RTU Addressing Range 1 to 127
• N2 Addressing Range1 to 127
Installation Environment
Protected, Dry
Ambient Operating Conditions Temperature: -40 to 65°C; (-40 to 149°F) Humidity: 0% to 95% Noncondensing
Ambient Storage Conditions Temperature: -40 to 85°C (-40 to 185°F) Humidity: 0 to 95% RH, Noncondensing
Power
External to Equipment (Inside Enclosure): One 3-Position Terminal Block for
120/240 VAC Supply Power
Internal to Equipment SC-EQ Comm Card Assembly: Removable Terminal
Plug for 24 VAC Supply Power and Removable Terminal Plug for 12 VDC Supply
Power
Communication Wiring Terminations
BAS Protocol is automatically detected
BAS Port J12: RS-485 BAS Port Supporting BACnet MS/TP, Modbus RTU and
N2 Protocols With Available EOL Termination Switch
Equipment Protocol and Model are automatically detected
EQ 485 Port J8: RS-485 Equipment Port Supporting BACnet MS/TP and YORK
Talk II Protocols with Available EOL Termination Switch EQ 232 Port J7: RS-232
Equipment Port Supporting YORK Talk 3 Protocol
Connected Services
CS Port J11: RS-485 BAS Port Supporting BACnet MS/TP Protocol With
Available EOL Termination Switch
Wiring
Network Cable: 0.51 mm (24 AWG) (3 Cores Plus Shield)
Power Cable: 1.02 mm (18 AWG) Copper Wire Rated for 10 Amperes Per Core at
250 VAC
Materials
External to Equipment:
Metal Enclosure with Removable Lid, SC-EQ Comm Card Assembly, Power
Transformer
Internal to Equipment E-Link Board Assembly:
SC-EQ Comm Card Assembly
Mounting
External to Equipment: Screw Mount Enclosure
Internal to Equipment: SC-EQ OptiView/Latitude and IPU-II installation kit
Dimensions
External to Equipment: 241.3 x 136.5 x 63 mm (9 1/2 x 5 3/8 x 2 1/2 in.)
Internal to Equipment: 102 x 152 x 25.4 mm (4 x 6 x 1 in.)
Shipping Weight
External to Equipment: 2 kg (4.5 lb)
Internal to Equipment: 227 g (8 oz)
Compliance United States UL Listed 916/FCC Part 15 Conducted and Radiated
Europe
CE Mark - Johnson Controls, Inc. declares that this product is in compliance with
the essential requirements and other relevant provisions of the EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC.
BTL
B-ASC (BTL-24317)
NOTE: The performance specifications are nominal and conform to acceptable industry standards. for application of conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
SECTION 5 - TECHNICAL SPECIFICATIONS