Johnson Controls York AYK550, Руководство пользователя

Страница: 160 / 279

YORK, A Johnson Controls Company
%**8 = 9);
* = Active low
For the 0xxxx registers:
• Status is always readable.
• Forcing is allowed by user configuration of the drive for fieldbus control.
• Additional relay outputs are added sequentially.
The AYK550 supports the following Modbus function codes for coils:
//// 7h23;=,* ,>
The drive maps the following
information to the 1xxxx Modbus set called Modbus Discrete Inputs:
• Bit-wise map of the
STATUS WORD
(selected using parameter 5305
EFB CTRL
PROFILE
). The first 32 inputs are reserved for this purpose.
• Discrete hardware inputs, numbered sequentially beginning with input 33.
The following table summarizes the 1xxxx reference set:
\ =,2 23 =,2
01 Read coil status
05 Force single coil
15 (0x0F Hex) Force multiple coils
23;
!4>
* , "2=,2
%24
#, 33%24&!
!*#
Q
\J '!" %!&\*"
x
, ,%24
550
Q
\J '!" %!&\*"
x
0001
STATUS WORD
– Bit 0 RDY_ON READY
0002
STATUS WORD
– Bit 1 RDY_RUN ENABLED
0003
STATUS WORD
– Bit 2 RDY_REF STARTED
0004
STATUS WORD
– Bit 3 TRIPPED RUNNING
0005
STATUS WORD
– Bit 4 OFF_2_STA* ZERO_SPEED
0006
STATUS WORD
– Bit 5 OFF_3_STA* ACCELERATE
0007
STATUS WORD
– Bit 6 SWC_ON_INHIB DECELERATE
0008
STATUS WORD
– Bit 7 ALARM AT_SETPOINT
0009
STATUS WORD
– Bit 8 AT_SETPOINT LIMIT
0010
STATUS WORD
– Bit 9 REMOTE SUPERVISION
0011
STATUS WORD
– Bit 10 ABOVE_LIMIT REV_REF
0012
STATUS WORD
– Bit 11 EXT2 REV_ACT
0013
STATUS WORD
– Bit 12 RUN_ENABLE PANEL_LOCAL
0014
STATUS WORD
– Bit 13 N/A FIELDBUS_LOCAL
0015
STATUS WORD
– Bit 14 N/A EXT2_ACT
0016
STATUS WORD
– Bit 15 N/A FAULT
0017
STATUS WORD
– Bit 16 Reserved ALARM
0018
STATUS WORD
– Bit 17 Reserved REQ_MAINT
0019
STATUS WORD
– Bit 18 Reserved DIRLOCK