Johnson Controls York AYK550, Руководство пользователя

Страница: 248 / 279

YORK, A Johnson Controls Company
#8?8
,
=;#, 33
The drive complies with the following standards. The compliance with the European
Low Voltage Directive is verified according to standards EN 50178 and EN 60204-1.
Compliance is valid with the following provisions:
• The motor and control cables are chosen as specified in this manual.
• The installation rules of this manual are followed.
,#=4=,2
=2
• PC/ABS 2.5 mm, color NCS 1502-Y (RAL 90021 / PMS 420 C and 425 C)
• Hot-dip zinc coated steel sheet 1.5…2 mm, thickness of coating 100
micrometers
• Cast aluminium AlSi
• Extruded aluminium AlSi
%=W7
Corrugated board (drives and option modules), expanded polystyrene. Plastic
covering of the package: PE-LD, bands PP or steel.
2
The drive contains raw materials that should be recycled to preserve energy
and natural resources. The package materials are environmentally compatible
and recyclable. All metal parts can be recycled. The plastic parts can either be
recycled or burned under controlled circumstances, according to local
regulations. Most recyclable parts are marked with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed
circuit boards can be landfilled. The DC capacitors contain electrolyte and the
printed circuit boards contain lead, both of which will be classified as hazardous
waste within the EU. They must be removed and handled according to local
regulations.
For further information on environmental aspects and more detailed recycling
instructions, please contact your local YORK distributor.
=;#, 33
EN 50178 (1997) Electronic equipment for use in power installations
EN 60204-1 (1997) Safety of machinery. Electrical equipment of machines. Part 1:
General requirements.
/ 8*$8B
The final assembler
of the machine is responsible for installing:
• An emergency-stop device
• A supply disconnecting device
EN 60529: 1991 (IEC 529),
IEC 60664-1 (1992) Degrees of protection provided by enclosures (IP code)
EN 61800-3 (1996) +
Amendment A11 (2000) EMC product standard including specific test methods
UL 508C UL Standard for Safety, Power Conversion Equipment, second edition