Johnson Controls York AYK550, Руководство пользователя

Страница: 98 / 279

3
YORK, A Johnson Controls Company
$
2Q_\,\ =,2
This group defines situations that the drive should recognize as potential faults and defines how the
drive should respond if the fault is detected.
2Q_\,\ =,2
23 =,2 ! 7 !2,2 4, #
3001
*z*\'*& Q
Defines the drive response if the analog input (
AI
) signal drops below the fault limits and
AI
is used in reference
chain.
• 3021
AI
1
FAULT LIMIT
and 3022
AI
2
FAULT LIMIT
set the minimum limits
0 =
NOT SEL
– No response.
1 =
FAULT
– Displays a fault (7,
AI
1
LOSS
or 8,
AI
2
LOSS
) and the drive coasts to stop.
2 =
CONST SP
7 – Displays a warning (2006,
AI
1
LOSS
or 2007,
AI
2
LOSS
) and sets speed using 1208
CONST SPEED
7.
3 =
LAST SPEED
– Displays a warning (2006,
AI
1
LOSS
or 2007,
AI
2
LOSS
) and sets speed using the last operating
level. This value is the average speed over the last 10 seconds.
6 78*4+2=,
&#' #%
g2
"#' #%
B@W,9,=2 , 32,2 4?9 ,9 27
,7 2,>
3002
%"&!! Q
Defines the drive response to a control panel communication error.
1 =
FAULT
– Displays a fault (10,
PANEL LOSS
) and the drive coasts to stop.
2 =
CONST SP
7 – Displays a warning (2008,
PANEL LOSS
) and sets speed using 1208
CONST SPEED
7.
3 =
LAST SPEED
– Displays a warning (2008,
PANEL LOSS
) and sets speed using the last operating level. This value is
the average speed over the last 10 seconds.
6 78*4+2=,
&#' #%
g2
"#' #%
B@W,9,=2 , 32,2 4?9 ,9=2 ,2
=2@@ =,2 2,>
3003
m'!"\"' ^^
Defines the External Fault 1 signal input and the drive response to an external fault.
0 =
NOT SEL
– External fault signal is not used.
1 =
DI
1 – Defines digital input
DI
1 as the external fault input.
• Activating the digital input indicates a fault. The drive displays a fault (14,
EXTERNAL FAULT
1) and the drive coasts
to stop.
2…6 =
DI
2…
DI
6 – Defines digital input
DI
2…
DI
6 as the external fault input.
• See
DI
1 above.
-1 =
DI
1(
INV
) – Defines an inverted digital input
DI
1 as the external fault input.
• De-activating the digital input indicates a fault. The drive displays a fault (14,
EXTERNAL FAULT
1) and the drive
coasts to stop.
-2…-6 =
DI
2(
INV
)…
DI
6(
INV
) – Defines an inverted digital input
DI
2…
DI
6 as the external fault input.
• See
DI
1(
INV
) above.
3004
m'!"\"'F ^^
Defines the External Fault 2 signal input and the drive response to an external fault.
• See parameter 3003 above.
3005
&''!%!&' BF
Defines the drive response to motor overheating.
0 =
NOT SEL
– No response and/or motor thermal protection not set up.
1 =
FAULT
– When the calculated motor temperature exceeds 90 C, displays a warning (2010,
MOT OVERTEMP
).
When the calculated motor temperature exceeds 110 C displays a fault (9,
MOT OVERTEMP
) and the drive coasts to
stop.
2 =
WARNING
– When the calculated motor temperature exceeds 90 C, displays a warning (2010,
MOT OVERTEMP
).